Ph: 313-537-5026
Store Hours:
Mon-Fri 10am-7pm
Sat 10am-4pm
Sun Closed

|
"HammerHeads"
Head Porting Twin Cam, Evo, XL, Thunderstorm |
||
| Stage 1 = | $300 | Full Porting; Stock Guides, Valves, & Springs |
| $350 | Full Porting, Hi-flow Valve Guides, Stock Valves & Springs | |
| Stage 2 = | $525 |
Full Porting, Stock Valve Springs,
Hi-flow Valve Guides, Oversized Hi-Flow Intake Valves, Stock Exhaust Valves |
|
$625 '04-older |
Full Porting, Hi-Performance
Valve Springs & Valve Guides, Oversized Hi-Flow Intake Valves, Stock Exhaust Valves |
|
|
$650 '05-newer |
Full Porting, Hi-Performance
Valve Springs & Valve Guides, Oversized Hi-Flow Intake Valves, Stock Exhaust Valves |
|
| Stage 3 = | $975 |
Full Porting,
Hi-Performance Valve Springs & Valve Guides, 2.00" Hi-Flow Intake Valves & Seats, 1.615" Exhaust Valves |
|
Aftermarket Heads |
- |
Screamin Eagle, S&S, Ultima, others ... Call or email for details and price. |
|
Not sure which level of porting is right for you? No problem! Call or email with your specs and we'll make a recommendation. |
||
|
Average return time is approximately
2 weeks. Prices do not include shipping. All stages include inspection, cleaning, valve job, and new valve guide seals. |
||
| Optional Head Services | ||
| $50 | Port carburetor intake manifold to match heads | |
| $75 | Mill heads for compression | |
| $35 | CC cylinder head combustion chambers | |
| $75 | Machine heads for compression releases | |
| $125 | Machine heads for compression releases, including compression releases | |
|
Work Order Form Please print this form, fill it out, and enclose it with your parts |
||
| Other Common Parts and Services | ||
| $150 | Bore & hone cylinders, pair (88"-95" or 96"-103") |
![]() |
| $75 | Hone cylinders to next size up (+.010") | |
| $150 | True & weld Twin Cam flywheels |
![]() |
| $200 | Bore engine cases for larger diameter cylinders |
![]() |
| $300 | Timken bearing case conversion ('03 - later
Twin Cam) includes left case bearings and appropriate sprocket shaft spacer |
![]() |
| $30/pr | MLS head gaskets, Evo or TC, .030" or .040" |
![]() |
| $90 | Cometic top end gasket kit, TC, .030" or .040" | |
| $18 | S&S HL2T Lifter travel limiters | |
| Package Deals for Twin Cams | ||
| $400 | Bore & hone your cylinders for big bore
conversion (88"-95" or 96"-103"), SE cast flat top pistons, Cometic top end gasket kit |
|
| $410 | Roller chain cam conversion kit
'02-'06 (except '06 Dyna) - Does not include cams |
![]() |
| $675 | Roller chain cam conversion kit
'02-'06
(except '06 Dyna) Includes your choice of available Andrews cams |
|
| $925 | Roller chain cam conversion kit
'02-'06
(except '06 Dyna) Includes SE adjustable pushrods, HD lifters, and your choice of available Andrews cams |
|
| $460 | Roller chain cam conversion kit '99-'01 | |
| $725 | Roller chain cam conversion kit
'99-'01 Includes your choice of available Andrews cams |
|
| $975 | Roller chain cam conversion kit
'99-'01 Includes SE adjustable pushrods, HD lifters, and your choice of available Andrews cams |
|
| $1665 or $1715 |
Hammer's Special
('02-'06 or '99-'01 Twin Cam) Stage 1 head porting, bore & hone your cylinders, SE flat top pistons, Cometic gasket kit, roller chain cam conversion kit, Andrews cams, SE adjustable pushrods, HD lifters |
|
| Prices listed do not include shipping &
handling or sales tax if applicable Sending parts for service? Be sure to include a Work Order Form. |
||
| Carburetor Services | ||
| S&S Super "E", Super "G", Super
"D" Add an adjustable air bleed & external float bowl vent = $100 Bore .100" larger = $100 |
||
![]() |
![]() |
![]() |
All prices subject to change without notice.